Warm-season grass
Seashore Paspalum Grass Lawn Care Schedule
Seashore paspalum is a warm-season grass with an unmatched tolerance for salt — it can be irrigated with brackish or reclaimed water and thrives on coastal sites that would kill most turf. Fine-textured and capable of a low, dense, bermuda-like cut, it makes a beautiful lawn or sports surface in warm, nearly frost-free coastal climates, as long as you can manage its water and its tendency to thatch.
- Type
- Warm-season
- Mowing height
- 0.5–2″
- Nitrogen budget
- 2–4 lbs N / 1,000 sq ft / yr
- Growth habit
- Spreading (self-repairs)
- Shade tolerance
- Moderate
- Drought tolerance
- Moderate
- Traffic tolerance
- High
- USDA zones
- 9–10
Get region-specific timing
Pick your USDA hardiness zone for a Seashore Paspalum schedule with timing shifted to your local season:
Key care windows
Timing windows are flexible (early / mid / late) and tuned to a typical transition-zone season — soil temperature and your local weather should always have the final say.
Spring green-up & first mow
Timing: early March to mid-April
Warm-season turf begins breaking dormancy as soil temperatures reach about 55°F, but it isn't actively growing until the soil warms to roughly 65°F. Do not scalp Seashore paspalum to bring it out of dormancy. The low spring reset is a bermuda and zoysia practice; on Seashore paspalum it thins the stand rather than resetting it. Its own recommended height of 0.5–2″ is where its reserves and its shade and weed tolerance live, whether that number is high or low. Rake or lightly dethatch to lift the matted dormant leaf, mow at the normal height, and follow the one-third rule: never remove more than a third of the blade in one pass. Don't fertilize until it's about 50% green and actively growing — roughly when soil temperatures hold above ~65°F.
Spring pre-emergent (crabgrass)
Timing: mid-March to early April
Apply a pre-emergent herbicide as soil temperatures climb through the low 50s°F — before they reach the ~55°F at which crabgrass germinates — to stop summer weeds before they start. Whether a second pass is called for, how long after the first, and what the season's total may add up to are all set by the active ingredient and rate on your label, not by a general rule: some products are labeled for a split program and some are a single application for the year. Pick the product first, then read its split-application and maximum-annual-rate directions.
Most pre-emergents block desirable grass seed as well as weed seed, so a residual pre-emergent and seeding the same ground are mutually exclusive — pick one — though a few products (e.g. siduron, or mesotrione on labeled species) are made for use at seeding.
First feeding
Timing: late April to mid-May
Make the first fertilizer application 2–4 weeks after full green-up, once the lawn is actively growing. Feed about 2–4 lbs of nitrogen per 1,000 sq ft per year, and lean toward the low end — seashore paspalum holds good color at less nitrogen than most warm-season turf, and over-feeding is a fast track to thatch and disease rather than a better lawn.
Seashore paspalum holds its color at relatively low nitrogen — keep each feeding at or below ~1 lb per 1,000 sq ft and stay near the low end of the annual budget, since over-feeding drives thatch and disease. Confirm any herbicide is labeled for paspalum.
Aeration & dethatching
Timing: early May to late June
Core-aerate (and dethatch if the thatch layer is over about ½") during the peak growing season, when warm-season turf recovers fastest. Avoid aerating dormant or drought-stressed turf.
Summer feeding program
Timing: early June to late August
Summer is the warm-season growth peak. Feed about 2–4 lbs of nitrogen per 1,000 sq ft per year, and lean toward the low end — seashore paspalum holds good color at less nitrogen than most warm-season turf, and over-feeding is a fast track to thatch and disease rather than a better lawn. Spread the annual budget across the season rather than applying it all at once.
Keep any single feeding at or below ~1 lb of nitrogen per 1,000 sq ft, and stop nitrogen about 6 weeks before your first expected frost.
Summer weed & pest watch
Timing: early June to late August
Spot-treat broadleaf weeds during active growth, never on drought-stressed turf. Watch for insect and disease pressure in hot, humid weather and treat problem areas rather than the whole lawn.
Final feeding
Timing: early September to mid-September
Give a final feeding in early fall, then stop nitrogen — late-season nitrogen pushes tender growth into frost. How late this can safely run is regional: closer to the Gulf the grass is still growing well into autumn, while at the cold edge of its range this window closes weeks earlier, which is why it is pinned to your own freeze normals rather than to a month.
Stop nitrogen about 6 weeks before your first expected frost.
Fall soil test
Timing: early September to late October
Fall is the best time to take a soil test: lime or sulfur has the winter to react, and you go into spring with a real pH and fertility picture instead of guesswork. Send it to your state extension lab and tell them which grass you grow — the target pH is species-specific, and a lab that knows you have centipede reports against a different range than one assuming bluegrass.
Fall pre-emergent (winter weeds)
Timing: mid-September to mid-October
A fall pre-emergent applied before soil cools below about 70°F controls winter annual weeds like Poa annua and henbit.
Winter dormancy
Timing: early November to late December
Wherever winter brings frost, expect a brown, dormant lawn from the first frost until spring green-up: hold off on fertilizer and pre-emergent, and give a light watering during extended winter drought to prevent desiccation. In the warmest, nearly frost-free areas (roughly USDA zone 10 — south Florida, coastal Southern California), the lawn often just slows down and stays partly green rather than going fully dormant; keep mowing and watering lightly as needed, and it can still use a little nitrogen or iron for winter color.
Month-by-month schedule
A quick at-a-glance plan for Seashore paspalum, month by month.
| Month | Season | What to do |
|---|---|---|
| January | Winter· dormant |
|
| February | Winter· dormant |
|
| March | Spring |
|
| April | Spring |
|
| May | Spring |
|
| June | Summer |
|
| July | Summer |
|
| August | Summer |
|
| September | Fall |
|
| October | Fall |
|
| November | Fall· dormant |
|
| December | Winter· dormant |
|
See these dates for your exact yard
Your grass type is already filled in — add your ZIP in the free schedule generator for a month-by-month Seashore Paspalum plan tuned to your local season — no signup required.
Open the schedule generatorSeashore Paspalum care guide
Mowing
Seashore paspalum takes a low cut — 0.5–2", lower with a reel mower for a show surface. It builds thatch quickly at low heights, so mow frequently, keep the blade sharp, and plan on periodic dethatching or topdressing.
Watering
Paspalum's signature trait is salt tolerance: it can be watered with brackish or reclaimed water that would harm other lawns. It has only moderate drought tolerance, so give it about 1" of water per week — and an occasional deeper flush helps move salts through the root zone on salty sites.
Fertilizing
Feed about 2–4 lbs of nitrogen per 1,000 sq ft per year, and lean toward the low end — seashore paspalum holds good color at less nitrogen than most warm-season turf, and over-feeding is a fast track to thatch and disease rather than a better lawn.
Weed control
A healthy paspalum stand is dense enough to resist most weeds. Its salt tolerance even allows salt-based weed management on some sites, but use only products labeled for seashore paspalum and at its rate — confirm the label before spraying.
Strengths
- Exceptional salt tolerance — takes brackish or reclaimed irrigation and coastal spray
- Fine texture; mows low and dense for a show-quality surface
- Good wear tolerance and recovery
Watch out for
- Not cold-hardy — warmest, nearly frost-free coastal zones only
- Thatches readily and needs dethatching or topdressing
- Needs less nitrogen than bermuda — over-feeding brings thatch and disease
Common Seashore Paspalum lawn problems
Browning, patches, or pests on a seashore paspalum lawn? These guides help you diagnose what's actually wrong and what to do about it — safely, before you treat.
- Chinch bugsSpreading brown in the hottest, driest part of the lawn.
- ArmywormsGreen to brown in days — the late-summer caterpillar that eats lawns.
- GrubsSpongy turf that lifts like carpet — and how to confirm it.
- Lawn fungus & diseaseBrown patch, dollar spot, and the conditions that cause them.
- Brown patchesRound, spreading, or random — what brown patches are telling you.
- Dead or dormant?Tell a stressed-but-alive lawn from one that won't come back.
Is it too late for pre-emergent where you are?
"mid-March to early April" above is a long-term window, and the real trigger is soil temperature. Enter your ZIP in the free pre-emergent check to see where your soil sits against the crabgrass threshold right now — no signup required.
Check my pre-emergent windowA starting point — your plan adjusts to your yard
This Seashore Paspalum schedule is a research-based template for your grass type. Your lawn is one of a kind, though: the right timing and amounts also depend on your soil test, sun and shade, irrigation, lawn size, and the goals you set — a low-input yard, the deepest possible color, or just crowding out weeds. YardLedger takes this template and adjusts it to your yard's specific needs, then keeps refining it from the history of what you've actually done and how the lawn responded — so every recommendation gets more personal over time.
Safety first
Seashore paspalum holds its color at relatively low nitrogen — keep each feeding at or below ~1 lb per 1,000 sq ft and stay near the low end of the annual budget, since over-feeding drives thatch and disease. Confirm any herbicide is labeled for paspalum.
Local fertilizer rules can be stricter than this and can override it: several states and counties set a lower per-application limit, cap the soluble (quick-release) fraction separately, require a share of slow-release nitrogen, or ban applications outright during a seasonal blackout. Check your state or county rules before you spread.
How long you must wait between applying a residual pre-emergent and sowing grass seed on the same ground — in either order — is set by that product's active ingredient and rate, not by a general rule, and for many pre-emergents it is months rather than weeks: prodiamine's label calls for four months before overseeding at its lowest use rate, and longer as the rate goes up. Use the overseeding interval on the label of the product you actually applied.
Always read and follow the product label — it is the legal authority on rates, timing, and safety. These windows are regional estimates, not a prescription; defer to the label and your local extension office.